MBR1035-mbr1060 MBR1035 - mbr1060, rev. c ? 2001 fairchild semiconductor corporation MBR1035 - mbr1060 schottky rectifiers absolute maximum ratings* t a = 25c unless otherwise noted * these ratings are limiting values above which the serviceability of any semiconductor device may be impaired. electrical characteristics t a = 25c unless otherwise noted symbol parameter value units p d power dissipation 2.0 w r ja thermal resistance, junction to ambient 60 c/w r jl thermal resistance, junction to lead 2.0 c/w symbol parameter device units 1035 1045 1050 1060 v f forward voltage i f = 10 a, t c = 25 c i f = 10 a, t c = 125 c i f = 20 a, t c = 25 c i f = 20 a, t c = 125 c - 0.57 0.84 0.72 0.80 0.70 0.95 0.85 v v v v i r reverse current @ rated v r t a = 25 c t a = 125 c 0.1 15 ma ma i rrm peak repetitive reverse surge current 2.0 us pulse width, f = 1.0 khz 1.0 0.5 a features ? low power loss, high efficiency. ? high surge capacity. ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications. ? metal silicon junction, majority carrier conduction. ? high current capacity, low forward voltage drop. ? guard ring for over voltage protection. pin 1 + case + pin 2 - case positive to-220ac 1 2 thermal characteristics symbol parameter value units 1035 1045 1050 1060 v rrm maximum repetitive reverse voltage 35 45 50 60 v i f(av) average rectified forward current 10 a i fsm non-repetitive peak forward surge current 8.3 ms single half-sine-wave 150 a t stg storage temperature range -65 to +175 c t j operating junction temperature -65 to +150 c
MBR1035-mbr1060 MBR1035 - mbr1060, rev. c ? 2001 fairchild semiconductor corporation schottky rectifier (continued) typical characteristics 0 2 5 5 0 7 5 1 00 1 2 5 1 50 1 7 5 0 2 4 6 8 10 12 ambient temperature [oc] average rectified forward current, i f [a] single phase half wave 60hz resistive or inductive load .375" (9.00mm) load lengths MBR1035-mbr1045 mbr1050-mbr1060 0.01 0.1 1 10 100 0.1 1 10 100 pulse duration [s] transient thermal impedance [oc/w] o 0.1 1 10 100 25 50 75 100 125 150 175 number of cycles at 60hz peak forward surge current, i fsm [a] 0 . 1 1 10 1 0 0 100 200 500 1000 2000 5000 reverse voltage, v r [v] total capacitance, c t [pf] MBR1035-mbr1045 mbr1050-mbr1060 0 0.2 0.4 0.6 0.8 1 1.2 0.01 0.1 1 10 50 forward voltage, v f [v] forward current, i f [a] pulse width = 300 ? s 2% duty cycle t = 25 c o a t = 150 c o a MBR1035-mbr1045 mbr1050-mbr1060 0 20406080100120 0.001 0.01 0.1 1 10 20 percent of rated peak reverse voltage [%] reverse current, i r [ma] t = 25 c o a t = 75 c o a t = 125 c o a MBR1035-mbr1045 mbr1050-mbr1060 mbr1050-mbr1060 MBR1035-mbr1045 figure 1. forward current derating curv e figure 2. non-repetitive surge current figure 3. forward voltage characteristics figure 4. reverse current vs reverse voltage figure 5. total capacitance figure 6. thermal impedance characteristics
disclaimer fairchild semiconductor reserves the right to make changes without further notice t o any products herein t o improve reliability , function or design. fairchild does not assume any liability arising out of the applica tion or use of any product or circuit described herein; neither does it convey any license under its p a tent rights, nor the rights of others. trademarks the following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms datasheet identification product status definition advance information preliminary no identification needed obsolete this datasheet contains the design specifications for product development. specifications may change in any manner without notice. this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only. formative or in design first production full production not in production optologic? optoplanar? pacman? pop? power247? powertrench qfet? qs? qt optoelectronics? quiet series? silent switcher fast fastr? frfet? globaloptoisolator? gto? hisec? isoplanar? littlefet? microfet? micropak? microwire? rev. h4 a acex? bottomless? coolfet? crossvolt ? densetrench? dome? ecospark? e 2 cmos tm ensigna tm fact? fact quiet series? smart start? star*power? stealth? supersot?-3 supersot?-6 supersot?-8 syncfet? tinylogic? trutranslation? uhc? ultrafet a a a star*power is used under license vcx?
|
